P40499-B21 HPE 6TB SAS 12G LFF 7.2K RPM Midline Hard Drive for Midline Storage Arrays and Servers
Specifications
General
Device Type
Solid state drive – hot-swap
Capacity
1.92 TB
NAND Flash Memory Type
Triple-level cell (TLC)
Form Factor
2.5″ SFF
Interface
SATA 6Gb/s
Features
Digitally Signed Firmware
Height
0.3 in
Weight
17.64 oz
Bundled with
HPE Basic Carrier
Performance
Drive Writes Per Day (DWPD)
0.8
SSD Endurance
2400 TB
Drive Class
Read Intensive
Drive Transfer Rate
600 MBps (external)
Internal Data Rate
520 MBps (read) / 470 MBps (write)
4KB Random Read
55500 IOPS
4KB Random Write
24000 IOPS
Expansion & Connectivity
Interfaces
1 x SATA 6 Gb/s – 7 pin Serial ATA
Compatible Bay
2.5″ SFF
Power
Power Consumption
1.35 Watt (idle) ¦ 3.15 Watt (random read) ¦ 3.15 Watt (random write) ¦ 3.16 Watt (sequential read) ¦ 3.53 Watt (sequential write) ¦ 3.15 Watt (random read/write) ¦ 3.53 Watt (maximum)
Manufacturer Warranty
Service & Support
Limited warranty – 3 years
Compatibility Information
Designed For
HPE ProLiant DL20 Gen10 Plus (2.5″), DL20 Gen10 Plus Base (2.5″), DL20 Gen10 Plus Entry (2.5″), DL20 Gen10 Plus High Performance (2.5″), DL20 Gen10 Plus Performance (2.5″), DL325 Gen10 Plus V2 (2.5″), DL325 Gen10 Plus V2 Base (2.5″), DL325 Gen10 Plus V2 for Weka Base Tracking (2.5″), DL325 Gen10 Plus V2 Performance (2.5″), DL345 Gen10 Plus (2.5″), DL345 Gen10 Plus Base (2.5″), DL345 Gen10 Plus Entry (2.5″), DL360 Gen10 Plus (2.5″), DL360 Gen10 Plus All-NVMe Server for Software Defined Storage (2.5″), DL360 Gen10 Plus for Weka Base Tracking (2.5″), DL360 Gen10 Plus Network Choice (2.5″), DL365 Gen10 Plus (2.5″), DL380 Gen10 Plus (2.5″), DL380 Gen10 Plus Network Choice (2.5″), DL385 Gen10 Plus V2 (2.5″), DL385 Gen10 Plus V2 Base (2.5″), DL385 Gen10 Plus V2 Entry (2.5″), ML30 Gen10 Plus (2.5″), ML30 Gen10 Plus Entry (2.5″), ML30 Gen10 Plus Performance (2.5″) ¦ HPE SimpliVity 325 Gen10 Plus V2 Node (2.5″)
UPC: 190017508894
